Parts
All parts are original, Winchester, Springfield, HRA, or IHC
SA (Springfield Armory) | WRA (Winchester) | IHC (International Harvester) | HRA (Harrington Richardson)
| M1 Garand BARREL | SA | WRA | IHC | HRA |
| ’40 | $400.00 | $425.00 | ||
| ’41 | $400.00 | $425.00 | ||
| ’42 | $350.00 | $425.00 | ||
| ’43 | $250.00 | $425.00 | ||
| ’44 – ’45 | $175.00 | $425.00 | ||
| Post-war | $160.00 | $200.00 | $250.00 – $300.00 | $160.00 – $200.00 |
| M1 Garand BOLT | SA | WRA | IHC | HRA |
| WRA early (no hole) | $120.00 – $170.00 | |||
| WRA with hole | $100.00 – $145.00 | |||
| SA – 1 | $120.00 – $140.00 | |||
| 2, 5 | $80.00 – $100.00 | |||
| 12, 14, 17, 18, 19, post-war | $70.00 – $90.00 | $100.00 – $150.00 | $90.00 – $120.00 |
| M1 Garand BULLET GUIDE | SA | WRA | IHC | HRA |
| B-8875, B8875WRA | $55.00 | $95.00 | ||
| B8875, WRA unmarked | $55.00 | $85.00 | ||
| B8875SA, -1SA | $50.00 | |||
| Milled, CM or A | $30.00 | $80.00 | ||
| Stamped, WWII | $25.00 | |||
| Stamped, post-war | $20.00 | $20.00 | $20.00 |
| M1 Garand BUTT PLATE | SA | WRA | IHC | HRA |
| Butt plate – excellent | $40.00 | $80.00 | $40.00 | $40.00 |
| Butt plate – worn | $20.00 | $40.00 | $20.00 | $20.00 |
| Butt plate screw – numbered | Call | |||
| Butt plate screw – long | $4.00 | $4.00 | $4.00 | $4.00 |
| Butt plate screw – short | $3.00 | $4.00 | $3.00 | $3.00 |
| Butt sling swivel | $6.00 | $15.00 | $6.00 | $6.00 |
| Clip ejector | $6.00 | $6.00 | $6.00 | $6.00 |
6
| M1 Garand CLIP LATCH | SA | WRA | IHC | HRA |
| Round front (CM,A) | $40.00 | $60.00 | ||
| Square front | $25.00 | $35.00 | $25.00 | |
| Clip latch spring | $4.00 | $4.00 | $4.00 | $4.00 |
| Clip latch pin | $4.00 | $4.00 | $4.00 | $4.00 |
| Ejector and spring | $7.00 | $7.00 | $7.00 | $7.00 |
| Extractor spring & plunger | $20.00 | $20.00 | $20.00 | $20.00 |
| Firing pin, round | Call | Call | ||
| Firing pin, flat | $20.00 | $35.00 | $20.00 | $20.00 |
| M1 Garand FOLLOWER | SA | WRA | IHC | HRA |
| Early, CM | $40.00 | $85.00 | ||
| 8, 11, 12, 13, no marking | $25.00 | $50.00 | ||
| Others | $25.00 | $30.00 | $25.00 | $25.00 |
5
| M1 Garand FOLLOWER ARM | SA | WRA | IHC | HRA |
| Numbered | $50.00 | $65.00 | ||
| Single bevel | $25.00 | $35.00 | ||
| No bevel | $20.00 | $25.00 | $20.00 | $20.00 |
| Follower arm pin | $4.00 | $4.00 | $4.00 | $4.00 |
| Follower rod, short fork | $160.00 | $380.00 | ||
| Follower rod, late | $15.00 | $95.00 | $15.00 | $15.00 |
| M1 Garand FRONT SIGHT | SA | WRA | IHC | HRA |
| Front sight | $20.00 | $50.00 | $40.00 | $20.00 |
| Front sight, NM | $35.00 | |||
| Front sight seal | $60.00 | $60.00 | ||
| Front sight screw, early | $8.00 | $8.00 | ||
| Front sight screw, late | $6.00 | $6.00 | $6.00 | $6.00 |
| M1 Garand GAS CYLINDER bare (for complete +30SA +50WRA) | SA | WRA | IHC | HRA |
| D35449 | Call | Call | ||
| D35449 modified | Call | Call | ||
| Narrow base | $125.00 | $200.00 | ||
| Narrow base modified | $80.00 | $125.00 | ||
| Wide base | $80.00 | $150.00 | $80.00 | $80.00 |
| Gas cylinder lock | $15.00 | $30.00 | $15.00 | $15.00 |
| Gas cylinder lock, high hump | $15.00 | $15.00 | $15.00 |
| M1 Garand GAS CYLINDER SCREW | SA | WRA | IHC | HRA |
| Single slot | $45.00 | $65.00 | ||
| Late | $20.00 | $40.00 | $40.00 | $40.00 |
| M1 Garand HANDGUARD | SA | WRA | IHC | HRA |
| Front | $40.00-$60.00 | $100.00 | $40.00-$60.00 | $40.00-$60.00 |
| Front, liner | $5.00 | $5.00 | $5.00 | $5.00 |
| Front, ferrule | $5.00 | $5.00 | $5.00 | $5.00 |
| Rear | $40.00 – $60.00 | $100.00 | $40.00 – $60.00 | $40.00 – $60.00 |
| M1 Garand HAMMER | SA | WRA | IHC | HRA |
| C46008, -1 with extra hole | $80.00 | $90.00 | ||
| Hammer -1 | $100.00 | $125.00 | ||
| Hammer -2 | $45.00 | |||
| 3, 5, 7, 8, 9, 5 | $35.00 | $45.00 | $45.00 | $35.00 |
| Hammer pin | $3.00 | $3.00 | $3.00 | $3.00 |
| Hammer spring | $4.00 | $4.00 | $4.00 | $4.00 |
| Hammer spring housing | $12.00 | $12.00 | $12.00 | $12.00 |
| Hammer spring guide | $5.00 | $5.00 | $5.00 | $5.00 |
|
Hammer plungers |
$15.00 | $20.00 | $15.00 | $15.00 |
| M1 Garand HANDGUARD CLIP | SA | WRA | IHC | HRA |
| Grooved | $80.00 | $100.00 | ||
| Arched | $50.00 | |||
| Flat | $7.00 | $15.00 | $7.00 | $7.00 |
| M1 Garand LOWER BAND | SA | WRA | IHC | HRA |
| Grooved | $100.00 | $140.00 | ||
| Arched | $70.00 | $90.00 | ||
| Stamped | $15.00 | $30.00 | $15.00 | $15.00 |
| Lower band pin | $3.00 | $3.00 | $3.00 | $3.00 |
35
| M1 Garand OP ROD | SA | WRA | IHC | HRA |
| 1SA, 2SA uncut | Call | |||
| 1SA, 2SA cut | Call | |||
| 3SA, 6SA uncut | $250.00 – $300.00 | |||
| 3SA, 6SA cut | $150.00 – $200.00 | |||
| 9SA curved uncut | $250.00 – $300.00 | |||
| 9SA curved cut | $150.00 – $200.00 | |||
| 9SA straight uncut | $150.00 – $180.00 | |||
| 9SA straight cut | $125.00 | |||
| WRA slant uncut | $400.00 – $450.00 | |||
| WRA slant cut | $200.00 – $250.00 | |||
| WIN 13 straight uncut | $500.00 – $600.00 | |||
| WIN 13 straight cut | $300.00 – $350.00 | |||
| Others | $90.00 – $150.00 | $200.00 – $250.00 | $175.00 | |
| National Match | $150.00 – $200.00 | |||
| Op rod catch, early | $30.00 | $50.00 | ||
| Op rod catch, late | $25.00 | $35.00 | $25.00 | $25.00 |
| Op rod spring | $10.00 | $10.00 | $10.00 | $10.00 |
| M1 Garand REAR SIGHT | SA | WRA | IHC | HRA |
| Aperture, no track, early | $35.00 | $45.00 | ||
| Aperture, track, late | $25.00 | $35.00 | $25.00 | $25.00 |
| Aperture, NM | $50.00 | |||
| Aperture, NM hooded | $65.00 | |||
| Base | $25.00 | $35.00 | $45.00 | $25.00 |
| Base, NM | $60.00 | |||
| Cover B8872, 8872 | $60.00 | |||
| No rib | $50.00 | $75.00 | ||
| With rib, 41, 42, or “,” | $30.00 | $50.00 | ||
| Late | $20.00 | $50.00 | $20.00 | $20.00 |
| Elevation cap, checkered | $125.00-$150.00 | $350.00 – $400.00 | ||
| Elevation cap, knurled | $45.00 | $125.00 | ||
| Elevation cap screw | $5.00 | $5.00 | ||
| Elevation knob & pinion – late | $35.00 | $80.00 | $50.00 | |
| Elevation & windage knobs & pinion, late | $50.00 | $140.00 | $90.00 | |
| Windage knob, checkered | $125.00-$150.00 | $350.00-$400.00 | ||
| Windage knob, knurled | $45.00 | $200.00 | ||
| Windage knob, late | $30.00 | $60.00 | $40.00 | |
| Short pinion 6/40 | Call | Call | ||
| Short pinion 6/40 repro | $100.00 – $150.00 | $100.00 – $150.00 | ||
| Long pinion 8/36 | $35.00 | $35.00 | ||
| Long pinion with elevation cap | $80.00 | $160.00 | ||
| Long pinion with knobs, covers & lock bar | $150.00 | $335.00 | ||
| Flush nut | Call | Call | ||
| Flush nut repro | $60.00 | $60.00 | ||
| Lock bar, type 1 repro | $60.00 | |||
| Lock bar, type 2 | $30.00 | $45.00 | ||
| Lock bar, type 3 | $25.00 | |||
| Lock bar spring | $10.00 | $10.00 | ||
| Lock bar bushing | $10.00 | $10.00 | ||
| Complete sight – short pinion, flush nut | Call | Call | ||
| Complete sight – with repo pinion & flush nut | Call | Call | ||
| Complete sight – long pinion, lock bar | $200.00 | $420.00 | ||
| Complete sight – late | $75.00 | $225.00 | $175.00 | |
| Complete sight – National Match | $295.00 |
| M1 Garand SAFETY | SA | WRA | IHC | HRA |
| Early, 3, 4, 4SA | $60.00 | |||
| WRA high | $100.00 | |||
| WRA-4, 1 | $50.00 | |||
| 6SA no hole | $40.00 | |||
| 6, 9 | $40.00 | |||
| Late (11 & unmarked) | $35.00 | $40.00 | $35.00 |
| M1 Garand STOCK FERRULE | SA | WRA | IHC | HRA |
| Milled | $60.00 | $95.00 | ||
| No hole or small hole | $35.00 | |||
| Late | $20.00 | $35.00 | $20.00 | $20.00 |
| Stacking swivel | $10.00 | $10.00 | $10.00 | $10.00 |
| Stacking swivel screw | $4.00 | $4.00 | $4.00 | $4.00 |
| M1 Garand TRIGGER | SA | WRA | IHC | HRA |
| Extra hole | $40.00 | $55.00 | ||
| Late, “A” | $15.00 | $40.00 | $15.00 | $15.00 |
| Trigger pin | $3.00 | $3.00 | $3.00 | $3.00 |
| M1 Garand TRIGGER HOUSING | SA | WRA | IHC | HRA |
| D28290 (round hole) | $100.00 | $100.00 | ||
| -1 or -2 | $75.00 | |||
| Late | $50.00 | $70.00 | $70.00 | $70.00 |
| M1 Garand TRIGGER GUARD | SA | WRA | IHC | HRA |
| C46025, -1, -3 | $60.00 | $60.00 | ||
| Milled | $40.00 | |||
| Stamped, WWII (milled hook) | $30.00 | |||
| Stamped, late (tab hook) | $25.00 | $30.00 | $30.00 |
| M1 Garand TRIGGER GROUP – COMPLETE | SA | WRA | IHC | HRA |
| Early | Call | Call | ||
| Late | $150.00 – $180.00 | $200.00 – $250.00 | $200.00 – $250.00 | $200.00 – $250.00 |
Please be aware that not all items are available at all times. Call or email for availability.
Special Request
If you are looking for a part that is not listed on our site, please contact us with the description and we will get back to you.
Parts for Sale
Springfield Armory
Winchester
International Harvester
Harrington Richardson